How To Remove Geberit Wall Hung Toilet
Replacing or repairing a Geberit wall-hung toilet requires removing the toilet from the wall. This process is not as difficult as it may seem, but it does require some basic plumbing skills. In this article, we will provide you with a step-by-step guide on how to remove a Geberit wall-hung toilet.
Before we begin, it is important to gather the necessary tools and materials. You will need a pair of pliers, a screwdriver, a wrench, and a bucket. You may also want to wear gloves to protect your hands.
Step 1: Turn off the water supply
The first step is to turn off the water supply to the toilet. This can be done by turning the shut-off valve that is located behind the toilet. Once the water supply is turned off, flush the toilet to drain the remaining water from the tank.
Step 2: Disconnect the water supply line
Once the water supply is turned off, you can disconnect the water supply line from the toilet. To do this, use a pair of pliers to loosen the nut that is located at the base of the water supply line. Once the nut is loose, you can disconnect the water supply line from the toilet.
Step 3: Remove the mounting bolts
The next step is to remove the mounting bolts that are holding the toilet to the wall. These bolts are typically located behind the toilet. To remove the bolts, use a screwdriver to loosen the nuts that are located on the top of the bolts. Once the nuts are loose, you can remove the bolts from the toilet.
Step 4: Lift the toilet off the wall
Once the mounting bolts are removed, you can lift the toilet off the wall. To do this, grab the toilet on both sides and lift it straight up. Be careful not to damage the toilet or the wall.
Step 5: Remove the old toilet
Once the toilet is lifted off the wall, you can remove the old toilet from the room. To do this, simply carry the toilet out of the room and set it down in a safe place.
Step 6: Install the new toilet
The next step is to install the new toilet. To do this, simply reverse the steps that you took to remove the old toilet. First, place the new toilet in the desired location. Then, connect the water supply line to the toilet. Finally, secure the toilet to the wall using the mounting bolts.
How To Repair My Geberit Flush Wall Hung Wc Linstan
Geberit Toilet Repair And Maintenance How To
Geberit Installation System For Wall Hung Toilets 2 X 4 Installations
Going Behind The Wall 8 Easy Steps To Accessing A Concealed Cistern Installer
Geberit One Wc Installation
Geberit One Wc Installation
Geberit Frequently Asked Questions Usa
Wall Hung Toilet Help Contractor Talk Professional Construction And Remodeling Forum
The Complete Geberit Wc System It Just Belongs Together Global
Renee Wall Hung Pan Geberit In Cistern Square Matte Black Ons Decina Bathroomware