Burlap Wall Covering Diy - Paulbabbitt.com

Burlap Wall Covering DIY: A Step-by-Step Guide for a Rustic Charm

Burlap, a natural and versatile material, has gained popularity in interior design for its rustic and earthy charm. Burlap wall covering DIY allows you to add a unique and textured element to your home while creating a warm and inviting ambiance. Follow this step-by-step guide to successfully install burlap wall covering and transform your space into a cozy retreat.

Step 1: Gather Your Supplies

To begin your burlap wall covering project, ensure you have all the necessary supplies and materials at hand. These include:

Burlap fabric (measure and purchase enough to cover the desired wall space)
Adhesive suitable for burlap and your wall surface (i.e., spray adhesive or wallpaper paste)
Paint roller and tray (for applying adhesive)
Scissors or utility knife
Measuring tape and pencil
Smoothing tool (such as a wallpaper smoother or brayer)
Stepladder (if necessary)
Safety goggles and gloves (optional)

Step 2: Prepare Your Wall Surface

Before applying the burlap wall covering, ensure your wall surface is clean, dry, and free from any dirt, dust, or debris. If the wall has any imperfections, such as holes or cracks, repair them using appropriate fillers and sand them smooth.

Step 3: Measure and Cut Burlap Fabric

Carefully measure the wall space where you intend to install the burlap wall covering. Cut the burlap fabric to the desired size, leaving a few inches of extra material for overlap and trimming. Ensure the fabric is cut straight and even.

Step 4: Apply Adhesive to the Wall

Depending on the adhesive you have chosen, follow the manufacturer's instructions for proper application. If using spray adhesive, apply a thin, even coat onto the wall surface, working in small sections. If using wallpaper paste, mix it according to the package instructions and apply it to the wall using a paint roller.

Step 5: Install Burlap Fabric

Starting from one corner of the wall, carefully position the burlap fabric onto the adhesive-covered surface. Use your hands or a smoothing tool to gently press the fabric against the wall, ensuring there are no air bubbles or wrinkles. Overlap the edges of the burlap fabric slightly to create a seamless look.

Step 6: Trim Excess Fabric

Once the burlap fabric is installed, use a sharp utility knife or scissors to trim any excess material around the edges of the wall. Be careful not to cut into the wall surface.

Step 7: Seal the Edges

To ensure the burlap wall covering remains secure and durable, apply a sealant or varnish to the edges of the fabric. This will help prevent fraying and peeling over time. Allow the sealant or varnish to dry completely before touching or decorating the wall.

Enjoy Your Burlap Wall Covering

With your burlap wall covering successfully installed, you can enjoy the natural beauty and rustic charm it brings to your space. Whether you choose to paint, hang art, or simply leave the burlap in its natural state, this DIY project adds a unique and inviting touch to any room.