How To Remove Wall Mounted Toilet Roll Holder

Wall-mounted toilet roll holders are a convenient and space-saving way to store toilet paper in your bathroom. However, there may come a time when you need to remove the holder, perhaps to replace it with a new one or to make repairs. Here is a step-by-step guide on how to remove a wall-mounted toilet roll holder:

Step 1: Gather Your Tools

You will need the following tools to remove a wall-mounted toilet roll holder:

Screwdriver
Drill (optional)
Hammer (optional)
Pry bar (optional)

Step 2: Locate the Screws

Most wall-mounted toilet roll holders are held in place by two screws. Locate the screws on the back of the holder. If the screws are covered by caps, pry off the caps with a screwdriver or knife.

Step 3: Remove the Screws

Use a screwdriver to remove the screws. If the screws are rusted or seized, you may need to use a drill to remove them. Be careful not to damage the wall or the holder when removing the screws.

Step 4: Remove the Holder

Once the screws are removed, you should be able to pull the holder straight down to remove it from the wall. If the holder is stuck, you may need to use a pry bar to gently pry it off the wall.

Step 5: Clean the Wall

Once the holder is removed, clean the wall where the holder was mounted. This will remove any remaining screws or debris that could damage the new holder.

Step 6: Install the New Holder (Optional)

If you are replacing the old holder with a new one, follow the instructions that came with the new holder to install it. Be sure to use the correct screws and anchors for your wall type.

Tips:

If the screws are stripped or damaged, you may need to use a drill to remove them.
Be careful not to damage the wall or the holder when removing it.
If you are having difficulty removing the holder, do not force it. Contact a professional for assistance.