How To Build A Retaining Wall On Slope With Sleepers

Building a retaining wall on a slope using sleepers is a project that requires careful planning and execution. By following these steps, you can construct a sturdy and long-lasting retaining wall that will help to prevent erosion and improve the stability of your slope.

### Gathering Materials

Before you begin, you will need to gather the following materials:

* Sleepers (pressure-treated lumber or railroad ties) * Gravel * Landscape fabric * Stakes * Level * Tamper * Shovel * Measuring tape * Circular saw * Drill ### Preparing the Site

The first step is to prepare the site for the retaining wall. This involves clearing away any vegetation and debris from the area. You will also need to level the ground where the wall will be built. This can be done by using a level and a tamper.

### Installing the Gravel Base

Once the site is prepared, you will need to install a gravel base for the retaining wall. This will help to provide drainage and stability for the wall. To do this, spread a 4-inch layer of gravel over the area where the wall will be built. Compact the gravel using a tamper.

### Laying the Landscape Fabric

The next step is to lay landscape fabric over the gravel base. This will help to prevent weeds from growing through the gravel and undermining the retaining wall. Cut the landscape fabric to fit the area where the wall will be built. Overlap the edges of the fabric by at least 6 inches.

### Installing the Sleepers

The next step is to install the sleepers. Start by laying out the sleepers in a single row along the bottom of the slope. Make sure that the sleepers are level and that they are spaced evenly apart. Once the first row of sleepers is in place, you can begin to stack the sleepers on top of each other to form the wall.

### Backfilling the Wall

Once the wall is built, you will need to backfill it with gravel. This will help to provide support for the wall and prevent it from collapsing. To do this, shovel gravel into the space behind the wall. Compact the gravel using a tamper.

### Finishing the Wall

The final step is to finish the wall. This can be done by adding a cap to the top of the wall. The cap will help to protect the wall from the elements and give it a more finished look. You can also add decorative elements to the wall, such as plants or rocks.

By following these steps, you can build a sturdy and long-lasting retaining wall on a slope using sleepers. This will help to prevent erosion and improve the stability of your slope.