How To Build Concrete Wall Forms With Plywood

Concrete wall forms are essential for creating strong and durable concrete walls. They provide the shape and support for the concrete as it sets, ensuring that the wall is the correct size and shape. Building concrete wall forms with plywood is a relatively simple process, but there are a few key aspects that must be considered to ensure that the forms are strong enough to withstand the weight of the concrete and that the concrete is able to cure properly.

The first step in building concrete wall forms is to determine the size and shape of the wall. Once you know the dimensions of the wall, you can begin to cut the plywood to size. The plywood should be cut to the exact dimensions of the wall, plus an additional 2 inches on all sides to allow for the concrete to overhang the edges of the forms.

Once the plywood is cut to size, it is important to seal the edges of the plywood to prevent the concrete from leaking out. This can be done with a variety of materials, such as caulk or tape. Once the edges of the plywood are sealed, you can begin to assemble the forms.

The forms should be assembled on a level surface. The plywood sheets should be placed side-by-side, with the edges of the plywood overlapping by at least 2 inches. The forms should be held together with nails or screws. Once the forms are assembled, you can begin to pour the concrete.

The concrete should be poured into the forms slowly and evenly. As the concrete is poured, it is important to vibrate the concrete to remove any air bubbles. Once the concrete is poured, it should be allowed to cure for at least 24 hours before the forms are removed.

Building concrete wall forms with plywood is a simple process, but it is important to consider the essential aspects of the process to ensure that the forms are strong enough to withstand the weight of the concrete and that the concrete is able to cure properly.