How To Install Corrugated Metal Wall Panels

How to Install Corrugated Metal Wall Panels

Corrugated metal wall panels are a popular and affordable option for both residential and commercial buildings. They are durable, weather-resistant, and easy to install. If you are looking to install corrugated metal wall panels on your own, follow these steps.

Tools and Materials You Will Need

Corrugated metal wall panels
Self-drilling screws
Drill
Measuring tape
Level
Chalk line
Safety glasses
Gloves

1. Prepare the Wall

The first step is to prepare the wall for the installation of the corrugated metal panels. Remove any existing siding or trim. Then, inspect the wall for any damage or rot. If there is any damage, it should be repaired before installing the panels.

2. Install the Starter Strip

The starter strip is the first panel that is installed on the wall. It provides a base for the rest of the panels and ensures that they are level. To install the starter strip, measure the height of the wall and cut the starter strip to that length. Then, place the starter strip on the bottom of the wall and secure it with self-drilling screws.

3. Install the Corrugated Metal Panels

Once the starter strip is installed, you can begin installing the corrugated metal panels. Start by placing the first panel on the wall and aligning it with the starter strip. Then, secure the panel with self-drilling screws. Continue installing the panels in this manner, overlapping each panel by one corrugation.

4. Trim the Panels

Once all of the panels are installed, you need to trim them to fit the wall. To do this, measure the distance from the top of the wall to the bottom of the last panel. Then, cut the last panel to that length. You may also need to trim the sides of the panels to fit around windows and doors.

5. Seal the Panels

Once the panels are trimmed, you need to seal them to prevent water from leaking into the building. To do this, apply a bead of caulk along the seams of the panels. You can also use roofing cement to seal around windows and doors.

6. Install Flashing

Flashing is a thin sheet of metal that is installed around windows and doors to prevent water from leaking into the building. To install flashing, cut the flashing to the appropriate size and then place it around the window or door. Secure the flashing with self-drilling screws.