How To Put In Drywall Anchors Without A Drill

How to Put In Drywall Anchors Without a Drill

Drywall anchors are essential for securing heavy objects to drywall without damaging the wall. They are typically installed using a drill, but it is possible to install them without one using a few simple tools.

The first step is to mark the location of the anchor on the wall. Then, use a sharp object such as a nail or awl to make a small hole in the drywall. The hole should be just large enough to fit the anchor's screw.

Once the hole is made, insert the anchor into the hole and turn it clockwise until it is snug. The anchor should expand behind the drywall, creating a secure hold for the screw.

Once the anchor is installed, you can screw the object into the anchor. Be sure to use a screw that is the right size for the anchor.

Here are some additional tips for installing drywall anchors without a drill:

Use a hammer to tap the anchor into the hole if it is difficult to turn by hand.

If the anchor does not expand properly, remove it and try again with a larger hole.

Do not overtighten the screw, as this can damage the anchor or the drywall.

By following these tips, you can easily install drywall anchors without a drill and securely hang heavy objects on your walls.